The microwave, optical, and electro-optic properties of epitaxial barium titanate thin films grown on (100) MgO substrates and photonic crystal electro-optic modulators fabricated on these films were investigated to demonstrate the applicability of these devices for telecommunication and data networks. The electrical and electro-optical properties were characterized up to modulation...
Worldwide, governments are beginning to take action to reduce anthropogenic CO2 emissions in order to mitigate the extent of global climate change. The largest fraction of global CO2 emission comes from electrical power generation, which is rapidly being converted to wind and solar installations. The intermittent nature of renewable resources...
Organic photovoltaic (OPV) solar cells aim to provide efficient, flexible and lightweight photovoltaics (PV) with simple processing and low-cost. Advances in device optimization, structural and molecular design, as well as mechanistic understanding have helped increase device efficiency and performance. Within the framework of active layer optimization, systematically improving bulk heterojunction...
Growing energy and climate concerns in the United States and across the world demand improvements in energy efficiency, conservation, and renewability. Solid oxide fuel cells (SOFCs) are highly efficient devices that electrochemically convert the chemical energy of a fuel to electricity. These devices can operate on natural gas as a...
Nano-structured mixed ionic and electronic conducting (MIEC) materials have garnered intense interest in electrode development for solid oxide fuel cells due to their high surface areas which allow for effective catalytic activity and low polarization resistances. In particular, composite solid oxide fuel cell (SOFC) cathodes consisting of ionic conducting scaffolds...
The impacts of many important technologies are limited by the availability of better-performing materials. One factor limiting the ability of engineers to develop better materials is the speed at which they can search through possible formulations and processing schemes. Recently, machine learning algorithms have emerged as a possible route to...
Metal and bimetallic nanoparticles are of interest and are widely used in various applications because of their unique optical, electronic, and catalytic properties, which differ from those of their bulk counterparts. Better understanding of the thermodynamic and kinetic properties of nanoparticles and their underlying growth mechanisms can serve as a...
Accurate thermodynamic databases are the foundation of predictive microstructure and property models. An initial assessment of the commercially available Thermo-Calc TCAL2 database and the proprietary aluminum database of QuesTek demonstrated a large degree of deviation with respect to equilibrium precipitate phase prediction in the compositional region of interest when compared...
In today's rapidly changing world, there is constant demand for the development of new, high performance materials. Fire resistant steels can provide greater safety in the event of a building fire, creep resistant stainless steels can allow for higher power plant efficiency, and cobalt based superalloys have potential for use...
Graphene offers promising opportunities for applications in printed and flexible electronic devices due to its high electrical and thermal conductivity, mechanical flexibility and strength, and chemical and environmental stability. However, scalable production and processing of graphene presents a critical technological challenge preventing the application of graphene for flexible electronic interconnects,...
The transport properties of mayenite-based materials, Ca12Al14O33, were investigated. Systems studied included H-doped/ UV-irradiated Ca12Al14O33, Ca(12-x)MgxAl14O33 (x = 0.1, 0.3, 0.5, 0.8, 1) and Ca12Al(14-x)SixO(33+x/2) (x = 1, 2, 3, 4). The as-prepared Ca12Al14O33 exhibited a room temperature electronic conductivity on the order of 10^-10 S/cm, and a high temperature...
The electronic transport and magnetoresistive properties of the ferromagnetic semiconductor In1-xMnxAs were investigated in order to determine the nature of the transport and ferromagnetism in the films. p-InMnAs/n-InAs and metal/oxide/InMnAs heterojunctions were fabricated and characterized to elucidate the transport and magnetoresistance mechanisms at these technologically important interfaces.
The electronic transport...
Biomorphic silicon carbide (bioSiC) is a novel porous ceramic material derived directly from wood precursors. This material is fabricated by pyrolysis of a natural wood precursor in an inert atmosphere leaving an amorphous carbon scaffold. The amorphous carbon is infiltrated with molten Si in vacuum at elevated temperature, which reacts...
Solid oxide fuel cells (SOFCs), renowned for their high electrical generation efficiency with low pollutant production, are promising for reducing global energy and environmental concerns. However, there are major barriers for SOFC commercialization. A primary challenge is reducing the capital cost of SOFC power plants to levels that can compete...
Fundamental investigations on the origins of friction at the nanoscale were carried out using both theoretical and experimental approaches. A model was developed that analytically solves for friction by the motion of dislocations at atomically flat crystalline interfaces. It combines known concepts from dislocation drag, grain boundary theory, and contact...
The optical and magneto-optical properties of the ferromagnetic semiconductors, InMnAs and its alloy InMnAsP were investigated to determine the band structure and nature of the ferromagnetism in these materials. Alloys were grown by metal-organic vapor phase epitaxy. Infrared absorption of InMnAs was investigated to determine the presence and properties of...
Ceramic matrix composites are known for their low density, high strength and high stiffness, but lower fracture toughness compared to metal matrix composites. The addition of a reinforcing agent within the matrix can increase the toughness of the composite via many strain energy absorption mechanisms such as plastic deformation. This...
Using ab initio calculations, we discovered a quasi two-dimensional copper–bismuth nano sheet, which we call cubine. According to our predictions, single layers of cubine can be isolated from the recently reported high-pressure CuBi bulk material at an extremely low energetic cost, comparable to values to separate single layers of graphene...
Supramolecular chemistry has proven to be an effective strategy for bottom-up fabrication of monodisperse, functional nanostructures. However, most applications require these nanostructures to be spatially or orientationally ordered. This thesis investigates patterning and spatial confinement as tools for controlling order in self-assembling systems.
We first look to improve the ordering...
Polymers and polyelectrolytes are ideal tools for the development of novel self-assembled materials. The ability to control the length-scales of self-assembly, and thus the properties, for soft materials lies in the understanding and subsequent manipulation of competing intermolecular interactions, such as hydrophobicity, hydrogen bonding, van der Waals, electrostatics. In this...