Limit your search
- Mechanical engineering[remove]64
- Materials Science10
- Mechanics6
- Civil engineering4
- Nanotechnology4
- more Subjects »
Search Constraints
Filtering by:
Type
Work
Remove constraint Type: Work
Subject
Mechanical engineering
Remove constraint Subject: Mechanical engineering
« Previous |
1 - 20 of 64
|
Next »
Number of results to display per page
Search Results
-
- Description:
- Current technologies capable of establishing bioresorbable orthopedic fixation devices and stents have broad utility for biomedical applications to improve constructive tissue remodeling. Recent studies and investigations on bioresorbable conductors, semiconductors, dielectrics, and polymer substrates offer a promising opportunity to propel the existing non-degradable bioelectronic devices to the promising bioresorbable electronics,...
- Keyword:
- Soft materials, Bioresorbable electronics, Solid mechanics, Functional interfaces, Implantable electronics, and MEMS
- Subject:
- Mechanics, Bioengineering, and Mechanical engineering
- Creator:
- Yang, Quansan
- Owner:
- Scholarly Digital Publishing
- Language:
- en
- Date Uploaded:
- 02/02/2022
- Date Modified:
- 07/18/2022
- Date Created:
- 2021-01-01
- Resource Type:
- Dissertation
- Alternate Identifier:
- etdadmin_upload_824270 and http://dissertations.umi.com/northwestern:15603
-
- Description:
- Lubrication is the most means for sliding interface failure prevention because it helps separate two interacting surfaces, reduce asperity contacts and thus extend the working life of the parts. Improving the tribological performance of lubricated interfaces is a challenging work, as several influence factors are involved, such as coating, plasticity,...
- Keyword:
- Rotary engine, Elastohydrodynamic lubrication, Roller contact, Apex seal, and Tribology
- Subject:
- Mechanical engineering
- Creator:
- Liu, Zhong
- Owner:
- Scholarly Digital Publishing
- Language:
- en
- Date Uploaded:
- 02/12/2020
- Date Modified:
- 06/05/2020
- Date Created:
- 2019-01-01
- Resource Type:
- Dissertation
- Alternate Identifier:
- etdadmin_upload_684009 and http://dissertations.umi.com/northwestern:14792
-
- Description:
- Hollow biopsy needles are widely adopted medical devices for the removal of biological tissue to better identify a lesion or an abnormality observed through a physical exam or a radiology scan. These procedures can provide significantly more information than most medical tests, and they are usually performed on dermis layers,...
- Keyword:
- micro-serration, needle rotation, needle insertion, helical needles, tissue cutting, and core biopsy
- Subject:
- Mechanical engineering
- Creator:
- Giovannini, Marco
- Owner:
- Scholarly Digital Publishing
- Language:
- en
- Date Uploaded:
- 04/29/2020
- Date Created:
- 2020-01-01
- Resource Type:
- Dissertation
- Alternate Identifier:
- http://dissertations.umi.com/northwestern:14984 and etdadmin_upload_717405
-
- Description:
- Global energy demand is increasingly rapidly in today’s modern world with increasing living standards all around the world. As global energy demand rises, energy efficiency has never been more crucial and that the improvement of tribological systems is critical to the progress of the global future. A large part of...
- Keyword:
- Pocket, Misalignment, Lubrication, Texture, Journal Bearing, and Tribology
- Subject:
- Mechanical engineering
- Creator:
- Gu, Thomas
- Owner:
- Scholarly Digital Publishing
- Language:
- en
- Date Uploaded:
- 02/12/2020
- Date Created:
- 2019-01-01
- Resource Type:
- Dissertation
- Alternate Identifier:
- etdadmin_upload_685145 and http://dissertations.umi.com/northwestern:14805
-
- Description:
- In recent years, we have seen the embryo of Industry 4.0 which has been promoting manufacturing processes towards the future with better efficiency, higher accuracy and better reliability. However, manufacturing precision has been restricted by the precision of metrology and material characterization. In other words, one can only manufacture parts...
- Keyword:
- Digital Image Correlation, Metrology, Industry 4.0, Photometric Stereo, and Deep Learning
- Subject:
- Mechanical engineering
- Creator:
- Yang, Ru
- Owner:
- Scholarly Digital Publishing
- Language:
- en
- Date Uploaded:
- 08/23/2023
- Date Created:
- 2023-01-01
- Resource Type:
- Dissertation
- Alternate Identifier:
- http://dissertations.umi.com/northwestern:16719 and etdadmin_upload_1012433
-
- Description:
- Polymer nanocomposites have attracted great interest in recent years because of their potential as tailored materials with enhanced properties. Recent experiments have shown that polymer nanocomposites are able to achieve significant improvement in dielectrical, thermal, mechanical and other physical properties compared with their parent polymer systems. More importantly, these outstanding...
- Keyword:
- polymer nanocomposite, simulation, machine learning, optimization, database, and data mining
- Subject:
- Mechanical engineering
- Creator:
- Wang, Yixing
- Owner:
- Scholarly Digital Publishing
- Language:
- en
- Date Uploaded:
- 02/12/2020
- Date Created:
- 2019-01-01
- Resource Type:
- Dissertation
- Alternate Identifier:
- etdadmin_upload_685582 and http://dissertations.umi.com/northwestern:14811
-
- Description:
- Muscle strength assessment is a standard part of any clinical evaluation. Due to the kinematic and muscular redundancy in the human musculoskeletal system, muscle strength can not be measured directly in vivo. Clinicians utilize specific postures and forces to bias the muscles of interest, then infer the muscle strength from...
- Keyword:
- Active Learning , Parameter Estimation , Musculoskeletal Model, and Cervical Spine
- Subject:
- Mechanical engineering and Biomechanics
- Creator:
- Abbott, Rebecca Elizabeth
- Owner:
- Scholarly Digital Publishing
- Language:
- en
- Date Uploaded:
- 04/15/2021
- Date Created:
- 2021-01-01
- Resource Type:
- Dissertation
- Alternate Identifier:
- etdadmin_upload_797807 and http://dissertations.umi.com/northwestern:15487
-
- Description:
- Polymer nanocomposites are a class of advanced materials comprised of soft polymer matrix and nano-filler inclusions. While it has been found qualitatively that enhancements of material properties could be achieved by dispersing inorganic nano-particles into organic polymer matrix, the intrinsic governing principles of such composite has not been thoroughly studied...
- Keyword:
- Interphase, Data Mining, Design Optimization, Finite Element Analysis, Deep Learning, and Microstructure Characterization and Reconstruction
- Subject:
- Mechanical engineering, Computer science, and Engineering
- Creator:
- Li, Xiaolin
- Owner:
- Scholarly Digital Publishing
- Language:
- en
- Date Uploaded:
- 02/12/2020
- Date Created:
- 2018-01-01
- Resource Type:
- Dissertation
- Alternate Identifier:
- http://dissertations.umi.com/northwestern:14436 and etdadmin_upload_625304
-
- Description:
- High performance polymers and their composites have wide ranging application in advanced and emerging material systems. The macroscale performance of these advanced materials is often defined by interfaces that induce nanoscale changes in the microstructure or molecular conformations (termed the ‘interphase’) of the polymer. Atomic force microscopy (AFM) is an...
- Keyword:
- Indentation, Nanoconfinement, Polymers, Atomic Force Microscopy, Nanocomposites, and Additive Manufacturing
- Subject:
- Nanotechnology, Materials Science, and Mechanical engineering
- Creator:
- Collinson, David William
- Owner:
- Scholarly Digital Publishing
- Language:
- en
- Date Uploaded:
- 02/01/2021
- Date Created:
- 2020-01-01
- Resource Type:
- Dissertation
- Alternate Identifier:
- http://dissertations.umi.com/northwestern:15360 and etdadmin_upload_775260
-
- Description:
- Predicting pediatric spinal deformity (PSD) from X-ray images collected on the patient's initial visit is a challenging task. This research provides a bio-informed framework based on a mechanistic machine learning technique with dynamic patient-specific (PS) parameters to predict PSD. We provide a geometry-based bone growth model that can be utilized...
- Keyword:
- Adolescent idiopathic scoliosis (AIS), Mechanistic bio-informed machine learning, Pediatric spinal deformity (PSD), 3D reconstruction, X-ray images, and Mesh registration
- Subject:
- Mechanical engineering and Biomechanics
- Creator:
- Tajdari, Mahsa
- Owner:
- Scholarly Digital Publishing
- Language:
- en
- Date Uploaded:
- 06/22/2022
- Date Created:
- 2022-01-01
- Resource Type:
- Dissertation
- Alternate Identifier:
- etdadmin_upload_879756 and http://dissertations.umi.com/northwestern:15944
-
- Description:
- As the technology enabling touch-sense rendering of virtual textures grows in efficacy and prevalence, so too grows the need for a standardized means of storing, transferring, and reconstituting textural signals. Furthermore, to achieve the ultra-low-latency requirements of the next generation of global communications networks, this digital texture representation must be...
- Keyword:
- Haptics, Tactile Signal Compression, Touch, Ultrasonic Friction Reduction, and Virtual Texture
- Subject:
- Mechanical engineering
- Creator:
- Burns, David Arthur
- Owner:
- Scholarly Digital Publishing
- Language:
- en
- Date Uploaded:
- 03/24/2023
- Date Created:
- 2023-01-01
- Resource Type:
- Dissertation
- Alternate Identifier:
- http://dissertations.umi.com/northwestern:16413 and etdadmin_upload_962297
-
- Description:
- Polymer nanocomposites are a designer class of materials where nanoscale particles, functional chemistry and polymer matrix combine to yield unprecedented combinations of superior physical properties. While well-defined data representation and quantitative models have been developed in material science domains such as metallic alloys, polymer nanocomposites have remained a largely untouched...
- Keyword:
- nanocomposite, dielectrics, and materials informatics
- Subject:
- Mechanical engineering
- Creator:
- Zhao, He
- Owner:
- Scholarly Digital Publishing
- Language:
- en
- Date Uploaded:
- 02/12/2020
- Date Created:
- 2019-01-01
- Resource Type:
- Dissertation
- Alternate Identifier:
- etdadmin_upload_639974 and http://dissertations.umi.com/northwestern:14530
-
- Description:
- Active lateral force feedback is essential for haptic applications in which forces on the fingertip is perpendicular to or in the same direction of finger movement, such as virtual shape rendering and button click rendering. In this thesis, I first present a novel device, the UltraShiver, that can provide large...
- Keyword:
- Localized control, Electrostatic, Ultrasonic oscillation, Shape rendering, Active lateral force feedback, and Button click rendering
- Subject:
- Mechanical engineering
- Creator:
- Xu, Heng
- Owner:
- Scholarly Digital Publishing
- Language:
- en
- Date Uploaded:
- 06/28/2021
- Date Created:
- 2021-01-01
- Resource Type:
- Dissertation
- Alternate Identifier:
- http://dissertations.umi.com/northwestern:15498 and etdadmin_upload_800297
-
- Description:
- Additive manufacturing (AM), also known as three-dimensional (3D) printing, has received considerable interests in recent years. It enables fabrication of complex, customizable parts that would otherwise be too expensive or impossible for traditional manufacturing methods. 3D printing encompasses a wide variety of processes, including photopolymerization, material extrusion, selective laser sintering,...
- Keyword:
- Optical Imaging System, Continuous Liquid Interface Production, and Additive Manufacturing
- Subject:
- Mechanical engineering
- Creator:
- Hai, Rihan
- Owner:
- Scholarly Digital Publishing
- Language:
- en
- Date Uploaded:
- 06/22/2022
- Date Created:
- 2022-01-01
- Resource Type:
- Dissertation
- Alternate Identifier:
- http://dissertations.umi.com/northwestern:16043 and etdadmin_upload_900931
-
- Description:
- The functions of lubricants in moving interfaces are extensive; lubricants minimize friction, transfer heat, clean the rubbing surfaces, extract debris, and diminish wear. Rather than using separate lubricants for each of the functions, it is more desirable to make one lubricant serve multiple purposes, or a muti-functional lubricant. The goals...
- Keyword:
- Atomistic modeling of lubricants, Pour point, Tribopolymerization, Thermal conductivity, Tribology, and Interfacial tribochemistry
- Subject:
- Mechanical engineering
- Creator:
- Ahmed, Jannat
- Owner:
- Scholarly Digital Publishing
- Language:
- en
- Date Uploaded:
- 08/23/2023
- Date Created:
- 2023-01-01
- Resource Type:
- Dissertation
- Alternate Identifier:
- http://dissertations.umi.com/northwestern:16670 and etdadmin_upload_1004183
-
- Description:
- The rapid development of flexible electronics enables a huge amount of bio-integrated applications with advantages of the mechanical compliance, stretchability and comformability of the devices. My dissertation further advances this area by a series of projects, which include designing and optimizing novel compliant structures, proposing novel elastomer encapsulation process for...
- Keyword:
- Three-dimensional Assembly, Wearable electronics, Mechanical Design and Analysis, Stretchable and flexible electronics, Thermo-electric Energy Harvester, and Microflyer
- Subject:
- Electrical engineering, Mechanical engineering, and Fluid mechanics
- Creator:
- Li, Kan
- Owner:
- Scholarly Digital Publishing
- Language:
- en
- Date Uploaded:
- 02/12/2020
- Date Created:
- 2018-01-01
- Resource Type:
- Dissertation
- Alternate Identifier:
- etdadmin_upload_635054 and http://dissertations.umi.com/northwestern:14498
-
- Description:
- Additive manufacturing (AM) offers exciting advantages for the fabrication of metallic parts compared to traditional techniques, such as the ability to create complex geometries with less material waste. This is done by building arbitrary geometries in a layer-by-layer fashion, thereby giving the designer great control over the design of the...
- Keyword:
- Data-driven Modeling , Computational Fluid Dynamics, Finite Element Modeling, Additive Manufacturing, and Computational Mechanics
- Subject:
- Applied physics and Mechanical engineering
- Creator:
- Jones, Kevontrez
- Owner:
- Scholarly Digital Publishing
- Language:
- en
- Date Uploaded:
- 06/28/2021
- Date Created:
- 2021-01-01
- Resource Type:
- Dissertation
- Alternate Identifier:
- etdadmin_upload_807301 and http://dissertations.umi.com/northwestern:15507
-
- Description:
- Mixing by cutting-and-shuffling (like that for a deck of cards or a Rubik's cube) is a paradigm that has not been studied in detail even though it can be applied in a variety of situations including the mixing of granular materials. Mathematically, cutting- and-shuffling is described by piecewise isometries (PWIs),...
- Keyword:
- granular materials, mixing, machine learning, piecewise isometries, cutting-and-shuffling, and interval exchange transforms
- Subject:
- Applied mathematics, Chemical engineering, and Mechanical engineering
- Creator:
- Lynn, Thomas Ferguson
- Owner:
- Scholarly Digital Publishing
- Language:
- en
- Date Uploaded:
- 06/22/2022
- Date Created:
- 2022-01-01
- Resource Type:
- Dissertation
- Alternate Identifier:
- etdadmin_upload_881325 and http://dissertations.umi.com/northwestern:15951
-
- Description:
- In recent years Additive Manufacturing (also known as 3D printing) processes have risen in use within research and industry to create complex, custom parts, which would be otherwise too expensive or even impossible to fabricate via conventional manufacturing methods. While originated as a tool for rapid prototyping, the improvements in...
- Keyword:
- Scaffolds, Fabrication Accuracy, Biomedical, and Additive Manufacturing
- Subject:
- Mechanical engineering
- Creator:
- Ware, Henry Oliver Tenadooah
- Owner:
- Scholarly Digital Publishing
- Language:
- en
- Date Uploaded:
- 01/21/2021
- Date Created:
- 2020-01-01
- Resource Type:
- Dissertation
- Alternate Identifier:
- http://dissertations.umi.com/northwestern:15077 and etdadmin_upload_741389
-
- Description:
- Nanoelectromechanical (NEMS) systems fabricated using atomically-thin materials have low mass and high stiffness and are thus ideal candidates for force and mass sensing applications. Transition metal dichalcogenides (TMDCs) offer certain unique properties in their few-layered form – such as piezoelectricity and a direct band gap in some cases – and...
- Keyword:
- Nanoresonators, 2D Materials, Single Cell Analysis, Raman Spectroscopy, Localized Electroporation, and Cavity-Interferometry
- Subject:
- Nanotechnology, Nanoscience, and Mechanical engineering
- Creator:
- Nathamgari, Samba Shiva Prasad
- Owner:
- Scholarly Digital Publishing
- Language:
- en
- Date Uploaded:
- 02/12/2020
- Date Created:
- 2019-01-01
- Resource Type:
- Dissertation
- Alternate Identifier:
- etdadmin_upload_643740 and http://dissertations.umi.com/northwestern:14546
- « Previous
- Next »
- 1
- 2
- 3
- 4