The setting and hardening process of concrete is considered to be the most critical time period during the life of a concrete structure. Previous research has been conducted on an ultrasonic wave reflection method that utilizes a steel plate embedded in the concrete to measure the reflection loss of shear...
The nondestructive, in-situ testing of early-age concrete properties is a crucial point for the progress of many construction projects in the building sector. The application of such techniques can establish e.g. the earliest possible form removal from concrete construction elements, thereby opening highways to traffic or releasing prestress from steel...
In this paper, the correlation of reflection loss measured by an ultrasonic shear wave reflection
method and the microstructure in cement-based material is investigated. Three cement pastes
(Portland cement type I) with different water-cement ratios (0.35, 0.50 and 0.60) cured at 25
°C were examined. The ultrasonic shear wave reflection...
The Center for Advanced Cement-Based Materials (ACBM) is a consortium of researchers from: Northwestern University, University of Illinois at Urbana-Champaign, Purdue University, The University of Michigan, and The National Institute of Standards and Technology. This ACBM update contains information on the article "A better Maturity Meter?" by Surendra P. Shah...
This article summarizes an investigation of the structural response of a brick façade home in New Mexico. The subject Ricter residence was located some 1100 to 1400 ft away from an aggregate quarry, and was subjected to a maximum peak particle velocity and air blast over pressure of 0.29 ips...
Cracking is one of the most common concerns cited by owners of structures adjacent to construction or mining blasting. While a large database of case studies documenting the relative insignificance of ground motion induced by responsible blasting compared to weather effects on cracks in nearby structures has been established, the...
Most studies of crack response have focused on opening and closing of a crack in the plane of the wall in which the crack occurs. Crack movement also occurs perpendicular or normal to the plane of the wall. This paper will examine and compare the in-plane and out-of-plane (normal) response...
Surveillance of large geotechnical projects requires autonomous collection of data from a wide range of instrument types. An equally large range of data formats are employed by these measurement systems. A data exchange protocol is needed to make field data available for interpretation on a variety of platforms. This paper...
Blasting and climatological response of cracks are compared for structures constructed of concrete block typical of home construction in Europe. While much has been written comparing micrometer crack response of wood frame structures typical of residential construction in North America, little has been written concerning response of structures more typical...
Carbonation, a neutralizing reaction in cement paste, can be used to date cracks in cementitious materials. Currently, comparison between two cracks is the only method available to predict a relative age with carbonation. These two crack studies require a crack of known age in a similar material with similar exposure...