Autonomous Crack Monitoring (ACM) and Autonomous Crack Propagation Sensing (ACPS) are two types of structural health monitoring in which characteristics of cracks are recorded over long periods of time. ACM seeks to correlate changes in widths of cosmetic cracks in structures to nearby blasting or construction vibration activity for the...
This appendix contains all software used to program the MICA2 motes for Version 1 of the MICA2-based wireless ACM system. This appendix is organized by software directory and only the modified files are included.
This paper describes the technology and methods deployed in the continuous autonomous remote monitoring of cracks in interior and exterior walls of a residence near a limestone quarry. The objective is to quantitatively compare crack response due to blast-induced ground motion to that induced by diurnal temperature changes, weather fronts,...
This thesis summarized the qualification and testing of two commercial Autonomous Crack Monitoring (ACM) systems for use in measuring micrometer displacement of cracks. Qualification involved the assessment of both laboratory and field performance in a residential structure subjected to nearby quarry blasting for the production of roadway aggregate. Aggregate and...
In early 2001, a sinkhole formed directly under State Road 66 near the city of Sebring in Highlands County, Florida. The Florida DOT built a land bridge over the sinkhole and the road was reopened to traffic. Since SR-66 is an important regional trucking route, it was decided that the...
Cosmetic cracks are very common in structures, and most of the time they remain unnoticed and do not decrease the structural integrity. Although these cracks are unremarkable and barely noticeable, occupants become concerned about these cracks when construction occurs nearby. In order to investigate the true nature of these cracks,...
All structures have cosmetic cracks, which have no influence on structural integrity and usually remain unremarked until the structure’s occupants sense ground vibrations. Such vibrations are often associated with engineering activity, but are rarely responsible for cracks. However, this is difficult to prove without scientific basis. Automated Crack Monitoring (ACM)...
Autonomous Crack Measurement (ACM) facilitates simultaneous measurement of crack response to environmental changes and vibrations produced by various construction activities. Dual-purpose crack displacement sensors measure crack response, while the vibration environment is defined by standard seismological transducers and the weather environment is defined as changes in temperature and humidity. This...
This thesis consists of the data and analysis of structural responses for two different studies: the Office of Surface Mining (OSM) study of the velocity response of “atypical” residential structures and the Autonomous Crack Monitoring (ACM) study. The main basis of this thesis was to do additional analysis on a...
Construction is omnipresent in modern-day America. It's the sound and vibration of a nation scrambling to keep up with its burgeoning population. In most states, allowable construction-induced ground motions range from 0.5 to 1.0 inches per second (in/sec) and under certain
conditions up to 2.0 in/sec.
However, ground motion as...
The thesis describes the second phase of development of the Autonomous Crack Comparometer (ACC) system to incorporate measurements of ground motions and add several changes in the autonomous operation. In order to obtain the ground motion and air blast data, four additional transducers have been added. There are now a...
Mining near the town of Blanford, Indiana for a number of years has led to an opportunity for Peabody Coal Company to study and compare environmental and blast effects. Such a comparison allows description of any blast effects relative to those caused by common environmental changes, which should be familiar...
Miniaturized, wireless instrumentation is now a reality and this thesis describes development of such a system to monitor crack response. Comparison of environmental (long-term) and blast-induced (dynamic) crack width changes in residential structures has lead to a new approach to monitoring and controlling construction vibrations. In wireless systems transducer power...
This paper describes qualification of devices to measure sub micro-meter changes in crack width, which is the basis of autonomous crack monitoring for control of blasting vibrations. Performance of LVDT, eddy current and potentiometer sensors to monitor long-term and transient displacements will be described. Potentiometers are attractive for wireless measurement,...
This file contains power-point slides of Application to Crossbow’s Smart Dust Challenge Contest, title "Wireless Data Acquisition System" by Mat Kotowsky and Hasan Ozer. The presentation was delivered at University of California, Berkeley on February 11, 2005.
This paper reviews the new field of geo-measurement with metallic cable time domain reflectometry (TDR) for surveillance of transportation facilities. TDR is radar in a coaxial cable, and is especially advantageous for remote monitoring because of its inherently digital nature. Advances can be separated into those that leverage use of...
Two longwall coalmine panels were mined at a depth of approximately 156 m (510 ft) beneath I-70 east of Washington, Pennsylvania such that it crossed the width of one panel at two locations. The Pennsylvania Department of Transportation (PennDoT) assumed responsibility for real time monitoring of both ground deformation and...
Time Domain Reflectometry (TDR) is a versatile technology amenable to a variety of measurements and nondestructive monitoring of infrastructure conditions. It can be utilized to monitor deformation of soil/rock and structures, monitor changes in fluid levels, and monitor water content of soils. Furthermore, this monitoring can be automated using systems...
Experimental Time Domain Reflectometry (TDR) data obtained from the field are compared with numerical simulations using a finite-difference solution of the transmission line equations. The model simulates transmission of a voltage pulse along a lossy coaxial cable where deformities on the cable, such as crimps and shears, are represented by...
This presentation contains information on the keynote paper "Health Monitoring of Early Age Concrete". The presentation was delivered by Surendra P. Shah at CONSEC'04 in Seoul, Korea on June 30, 2004.
The gradual evolution of the material properties of a cement-based material, i.e. the stiffness of cement paste, is the result of the continuous change of the microstructure with the progress of the hydration process. Based on an existing micromechanical model for the simulation of the shear and elastic modulus of...