A study is conducted to determine the effects on the early hydration kinetics and
compressive strength by seeding of Portland cement and alkali-activated blast furnace
slag with a pure form of calcium silicate hydrate (C-S-H). The effects of C-S-H seeding
during the early nucleation and growth period of each type...
The in-depth inspection by WIDOT detected two sites that had visible cracks in the stiffener-to-hanger diaphragm welds, the east side of Hanger 6 in the north tie girder, and the east side of Hanger 4 in the south tie girder. Additionally, many ultrasonic indications were detected by WIDOT in the...
The U.S. has 542,000 bridges that consume billions of dollars per year in construction, rehabilitation and maintenance funds and which are the lifelines of U.S. commerce. The 1992 ISTEA (fntermodal Surface Transportation Efficiency Act) mandates the implementation of a quantitative computerized bridge management system by I 996. A prime need...
The nondestructive, in-situ testing of early-age concrete properties is a crucial point for the progress of many construction projects in the building sector. The application of such techniques can establish e.g. the earliest possible form removal from concrete construction elements, thereby opening highways to traffic or releasing prestress from steel...
The setting and hardening process of concrete is considered to be the most critical time period during the life of a concrete structure. Previous research has been conducted on an ultrasonic wave reflection method that utilizes a steel plate embedded in the concrete to measure the reflection loss of shear...
The Center for Advanced Cement-Based Materials (ACBM) is a consortium of researchers from: Northwestern University, University of Illinois at Urbana-Champaign, Purdue University, The University of Michigan, and The National Institute of Standards and Technology. This ACBM update contains information on the article "A better Maturity Meter?" by Surendra P. Shah...
The gradual evolution of the material properties of a cement-based material, i.e. the stiffness of cement paste, is the result of the continuous change of the microstructure with the progress of the hydration process. Based on an existing micromechanical model for the simulation of the shear and elastic modulus of...
In this paper, the correlation of reflection loss measured by an ultrasonic shear wave reflection
method and the microstructure in cement-based material is investigated. Three cement pastes
(Portland cement type I) with different water-cement ratios (0.35, 0.50 and 0.60) cured at 25
°C were examined. The ultrasonic shear wave reflection...
This presentation contains information on the keynote paper "Health Monitoring of Early Age Concrete". The presentation was delivered by Surendra P. Shah at CONSEC'04 in Seoul, Korea on June 30, 2004.
The setting and hardening process of concrete can be considered as the most critical time period during the life of a concrete structure. To assure high quality and avoid problems in performance throughout the life of the material, it is essential to have reliable information about the early age properties...
The concrete currently used in the slip-form paving process is a low slump concrete that requires both internal and external vibration in order to achieve satisfactory compaction. The use of vibrator fingers for the internal vibration often leads to trails on the surface of the pavement and to segregation around...
The paper deals with the behavior of fluid cement pastes, formulated from Self Consolidating Concretes (SCCs), and the experimental correlation of fundamental rheological properties, such as the yield stress and the viscosity, with measurements from field tests, such as the mini-cone slump flow test. As a matter of fact, several...
This presentation contains information on the project "Aligning Data to Support Transportation Decisions, Emerging Challenges & Opportunities for the Data World". The presentation was delivered by Joseph L. Schofer at Transportation Research Board – AASHTO Peer Exchange meeting on May 15-16, 2008.
Gentrification - the process in which higher income (and often younger) households displace lower income residents of a city neighborhood - has been occurring in many urban neighborhoods over the last few decades. This process changes the demographics, and often the essential character, of the neighborhood. As a result, we...
This presentation contains information about the project "The future of transportation... and how we'll pay for it" by Joseph L. Schofer, Department f Civil & Environmental Engineering. The presentation was delivered at the 40th Anniversary Seminar Day at Northwestern University on April 18, 2009.
This study tested a dynamic traffic assignment (DTA) model as a tool for pre-planning strategies for managing major freeway incidents. Incidents of varying scale and duration were modeled in the northern Chicago highway network, and the impacts of incidents and response actions were measured in terms of both lane-mile-hours of...
The mission of the Infrastructure Technology Institute is to develop strategies and tools
to protect and improve the condition, capacity and performance of the nations highway, railroad,
and mass transit infrastructure systems. The Institute does this through the development
and deployment of (1) advanced technologies for structural health monitoring, (2)...
This presentation provides information on the project "Safety Concrete - a Material Designed to Fail" by Jeffrey J. Thomas, Julie Gevrenov, Hamlin Jennings, and Edward O'Neil. The presentation was delivered at the 106th Annual Meeting & Exposition of The American Ceramic Society, Indianapolis, Indiana in 2004.
Few would argue that concrete is an important and useful material: after all, concrete is the backbone of the world’s infrastructure, used in vast amounts to make roads, buildings, bridges, and other structures. But sometimes familiarity breeds contempt. To most people, concrete is simply that boring grey stuff that we...
The objective of this program is to measure the changes in the properties of the C-S-H gel phase in cement paste as a function of the Ca/Si ratio. The motivation is to better understand the hydration products that form in blended cements with lower Ca/Si ratios than portland cement. The...