Northwestern University developed copper-precipitation-hardened, high-performance weathering steel (NUCu 70W Steel) that is produced by hot rolling after casting and then air-cooling. Due to simple processing the steel is fabricated at lower cost than competing high-performance steels that require quench and tempering. NUCu 70W steel can be easily welded without pre-...
Nitrogen (N) deposition can alter belowground microbial communities, especially ectomycorrhizal (ECM) fungi, resulting in a reduced ability of associated trees to access organic nutrients. This study tested whether N addition decreases ECM species richness and shifts ECM species composition across spatial scales in a subtropical slash pine (Pinus elliottii) plantation...
The Avalon Media System (Avalon) provides access and management for digital audio and video collections in libraries and archives. The open source project is led by the libraries of Indiana University Bloomington and Northwestern University and is funded in part by grants from The Andrew W. Mellon Foundation and Institute...
Touch screen devices such as smartphones and tablets are now ubiquitous in the lives of American children. These devices permit very young children to engage interactively in an intuitive fashion with actions as simple as touching, swiping and pinching. Yet, we know little about the role these devices play in...
This presentation provides information on the progress report of the project "Empirical Study of Life-Cycle Cost Analysis for Bridges" by Ahmad Hadavi, 2003.
Concern over construction vibration-induced cracking has led to development of a new approach to vibration monitoring called autonomous crack measurement (ACM) and illustrated in Figure 1. This paper describes the concept as well as sensor performance in the first test house fitted an ACM system. Response of three cracks in...
The setting and hardening process of concrete is considered to be the most critical time period during the life of a concrete structure. Previous research has been conducted on an ultrasonic wave reflection method that utilizes a steel plate embedded in the concrete to measure the reflection loss of shear...
In this paper, the correlation of reflection loss measured by an ultrasonic shear wave reflection
method and the microstructure in cement-based material is investigated. Three cement pastes
(Portland cement type I) with different water-cement ratios (0.35, 0.50 and 0.60) cured at 25
°C were examined. The ultrasonic shear wave reflection...
This appendix synthesizes micrometer changes in crack width in response to both long term (environmental) and transient (blast vibration) of four of the structures in the main body. The appendix begins with a description of the genesis of the study and instruments employed. Response of the distressed wood-framed structure in...
The object of this working paper is to present a new explanation for the behavior of rebel groups in relation to host communities. This study, which represents the main argument and ideas of my forthcoming dissertation, accounts for the change in rebel group behavior, from coercive to contractarian and vice...