Organic light emitting diodes (OLEDs) are fabricated and characterized on anodes modified by a variety of surface treatments. OLED performance response is correlated to the treatment conditions with current-voltage (I-V) measurements and impedance spectroscopy. Small-scale OLED arrays are fabricated using a novel shadow mask approach and are characterized with electrical...
The electronic properties of various transparent conducting oxide (TCO) surfaces are probed electrochemically via self-assembled monolayers (SAMs). A novel graftable probe molecule having a tethered trichlorosilyl group and a redox-active ferrocenyl functionality (Fc(CH2)4SiCl3) is synthesized for this purpose. On as-received ITO, saturation coverage by a close-packed monolayer having of 6.6...
Magnetic resonance imaging (MRI) is a technique widely used in both clinical and experimental settings to produce high-resolution images of opaque living organisms without utilizing ionizing radiation. Currently, MR imaging is augmented by contrast agents; however, these small molecule Gd(III) chelates are confined to extracellular and vascular regions of the...
N-Heterocyclic carbene catalysis has recently emerged as an important field in organic chemistry. Two new strategies have been developed to advance the use of N-heterocyclic carbenes (NHCs) as Lewis-base organic catalysts. The first approach utilizes NHCs to catalyze the generation of homoenolates and the conjugated Breslow intermediate is added to...
Chapter 1 describes the homopolymerization of styrene and the copolymerization of ethylene and styrenic comonomers mediated by the single-site bimetallic "constrained geometry catalysts" (CGCs), (µ-CH2CH2-3,3'){(η5-indenyl)[1-Me2Si(tBuN)](TiMe2)}2 [EBICGC(TiMe2)2; Ti2], (µ-CH2CH2-3,3'){(η5-indenyl)[1-Me2Si(tBuN)](ZrMe2)}2 [EBICGC(ZrMe2)2; Zr2], (µ-CH2-3,3'){(η5-indenyl)[1-Me2Si(tBuN)](TiMe2)}2 [MBICGC(TiMe2)2; C1-Ti2], and (µ-CH2-3,3'){(η5-indenyl)[1-Me2Si(tBuN)](ZrMe2)}2 [MBICGC(ZrMe2)2; C1-Zr2], in combination with the borate activator/cocatalyst Ph3C+B(C6F5)4- (B1). Under identical styrene homopolymerization conditions,...
Metal nanoprisms are a novel class of anisotropic nanomaterials with unique optical properties dependent on their size, shape, and composition. Silver nanoprisms are of particular interest because their surface plasmon resonance bands are readily tunable in the visible and near-IR region. The objectives of this thesis research focus on photochemical...
Conjugated organic molecules and polymers hold significant promise for use as active materials in electronic devices. Employing such "soft" materials can decrease cost of device fabrication, while enabling unique properties such as mechanical flexibility, large-area coverage, and highly tunable materials properties. A primary roadblock to the realization of this dream...
Chemical vapor deposition (CVD) is a well-developed technique for growing thin films of a wide variety of materials, which relies on the development of new and better performing metal-organic precursors. To this end, three studies have been conducted into the compatibility of sulfur and phosphine containing ligands with low- and...
This thesis summarizes our research efforts on the application of the nano-structured anodic aluminum oxide (AAO) membrane in heterogeneous catalysis. Procedures for growing the AAO membrane in the center of an aluminum disc have been developed by appropriately masking the disk's perimeter during the anodization and etching steps. The remaining...
Metallic nanostructures are able to confine and manipulate electromagnetic fields because light can couple to free electron oscillations called surface plasmons (SPs). These plasmons exist on metal surfaces as localized (short-range) or as propagating (long-range) modes depending upon the size and geometry of the nanostructure. This dichotomy is primarily an...