The segmental prestressed concrete box girder of Koror-Babeldaob (KB) Bridge in Palau, which had the record span of 241 m (791 ft.), presents a striking paradigm of serviceability loss due to excessive multi-decade deflections. The data required for analysis have recently been released and are here exploited to show how...
This report includes the findings of acoustic emission (AE) tests on the Fremont tied arch bridge in Portland Oregon conducted by research engineers from the Infrastructure Technology Institute of Northwestern University on March 24th, 1997.
Current bridge condition determination is based almost entirely on the use of visual inspection. This approach to bridge inspection provides data that is subjective and not traceable. Nondestructive evaluation (NDE) is a tool that in actuality is little used on bridges, but could eliminate much of the subjectivity of the...
The U.S. has 542,000 bridges that consume billions of dollars per year in construction, rehabilitation and maintenance funds and which are the lifelines of U.S. commerce. The 1992 ISTEA (fntermodal Surface Transportation Efficiency Act) mandates the implementation of a quantitative computerized bridge management system by I 996. A prime need...
This report describes the results of applying acoustic emission (AE) testing to the trunnion shafts of the East Span of the 1-5 Interstate Bridge. The tests were done at the request of Oregon DOT personnel to determine if active fatigue racks are present in the subject shafts.
The in-depth inspection by WIDOT detected two sites that had visible cracks in the stiffener-to-hanger diaphragm welds, the east side of Hanger 6 in the north tie girder, and the east side of Hanger 4 in the south tie girder. Additionally, many ultrasonic indications were detected by WIDOT in the...
The finite element method is used to investigate failure mechanisms in pin-hanger connection in aging highway bridges. Bridge pins and hangers are typically considered as critical elements whose failure may result in partial or entire collapse of the structure. The primary function of a pin-hanger connection is to allow for...
Despite a relatively mature technology for its control, corrosion caused by stray current from electrified rapid-transit systems costs the United States approximately $500 million annually. Part of that cost is the result of corrosion of the electrified rapid-transit system itself, and part is the result of corrosion on neighboring infrastructure...