This manual describes use of a new hybrid autonomous crack and structural response monitoring (ACSM) system. It is designed as a low cost alternative to the research grade version employing SOMAT’s eDAQ data recording system. The concept is to combine a new field portable, 24 bit, 12 channel seismograph with...
This presentation contains information on the project "Aligning Data to Support Transportation Decisions, Emerging Challenges & Opportunities for the Data World". The presentation was delivered by Joseph L. Schofer at Transportation Research Board – AASHTO Peer Exchange meeting on May 15-16, 2008.
Kosnik, D. E., Northwestern University . Infrastructure Technology Institute, Department of Civil Environmental Engineering, Robert R. McCormick School of Engineering Applied Science. (2008). A new approach to acoustic emission testing of difficult-to-reach steel bridge details. Evanston, Illinois: Infrastructure Technology Institute/Department of Civil & Environmental Engineering.
Gentrification - the process in which higher income (and often younger) households displace lower income residents of a city neighborhood - has been occurring in many urban neighborhoods over the last few decades. This process changes the demographics, and often the essential character, of the neighborhood. As a result, we...
Cosmetic and structural cracks are a large concern for homeowners. Although these cracks can develop from a variety of causes: differential foundation settlement, occupant activity, climatological effects, as well as dynamic events, people tend to look to dynamic events like blasting, construction, or traffic vibrations to be the culprit. This...
The objective of this program is to measure the changes in the properties of the C-S-H gel phase in cement paste as a function of the Ca/Si ratio. The motivation is to better understand the hydration products that form in blended cements with lower Ca/Si ratios than portland cement. The...
This paper summarizes micro-inch response of cosmetic cracks in a typical slab-ongrade ranch style house to both construction equipment-induced vibration and environmental (weather) effects. This structure was instrumented, and its response studied as part of the development of an Autonomous Crack Measurement (ACM) system. ACM systems are intended to record...
Acoustic emission (AE) testing was used to identify the source of audible “bangs” generated during opening and closing of a large, double-leaf rolling-lift bascule bridge. The data were analyzed using a combination of well-established AE
techniques, including first hit analysis (FHA), planar location analysis, and linear location analysis. The FHA...
The finite element method is used to investigate failure mechanisms in pin-hanger connection in aging highway bridges. Bridge pins and hangers are typically considered as critical elements whose failure may result in partial or entire collapse of the structure. The primary function of a pin-hanger connection is to allow for...