There have been numerous studies that have aimed at improving the low tensile strength, stiffness, and toughness of cementitious materials. This study aims to show that all of these characteristics can be greatly improved by the addition of ladder scale reinforcement at the nano and micro scale. Carbon nanofibers (CNFs)...
Concern over construction vibration-induced cracking has led to development of a new approach to vibration monitoring called autonomous crack measurement (ACM) and illustrated in Figure 1. This paper describes the concept as well as sensor performance in the first test house fitted an ACM system. Response of three cracks in...
This paper summarizes micro-inch response of cosmetic cracks in a typical slab-ongrade ranch style house to both construction equipment-induced vibration and environmental (weather) effects. This structure was instrumented, and its response studied as part of the development of an Autonomous Crack Measurement (ACM) system. ACM systems are intended to record...
Carbonation, a neutralizing reaction in cement paste, can be used to date cracks in cementitious materials. Currently, comparison between two cracks is the only method available to predict a relative age with carbonation. These two crack studies require a crack of known age in a similar material with similar exposure...
Blasting and climatological response of cracks are compared for structures constructed of concrete block typical of home construction in Europe. While much has been written comparing micrometer crack response of wood frame structures typical of residential construction in North America, little has been written concerning response of structures more typical...
Surveillance of large geotechnical projects requires autonomous collection of data from a wide range of instrument types. An equally large range of data formats are employed by these measurement systems. A data exchange protocol is needed to make field data available for interpretation on a variety of platforms. This paper...
Cracking is one of the most common concerns cited by owners of structures adjacent to construction or mining blasting. While a large database of case studies documenting the relative insignificance of ground motion induced by responsible blasting compared to weather effects on cracks in nearby structures has been established, the...
This article summarizes an investigation of the structural response of a brick façade home in New Mexico. The subject Ricter residence was located some 1100 to 1400 ft away from an aggregate quarry, and was subjected to a maximum peak particle velocity and air blast over pressure of 0.29 ips...
The Center for Advanced Cement-Based Materials (ACBM) is a consortium of researchers from: Northwestern University, University of Illinois at Urbana-Champaign, Purdue University, The University of Michigan, and The National Institute of Standards and Technology. This ACBM update contains information on the article "A better Maturity Meter?" by Surendra P. Shah...