The purpose of this comparative field qualification is to demonstrate the new Kelunji EchoPro
hybrid ACSM system and its performance relative to the eDAQ and eko Motes systems. These three
systems are installed at a test site in Sycamore, IL, adjacent to an active quarry. Data for this report was...
Despite a relatively mature technology for its control, corrosion caused by stray current from electrified rapid-transit systems costs the United States approximately $500 million annually. Part of that cost is the result of corrosion of the electrified rapid-transit system itself, and part is the result of corrosion on neighboring infrastructure...
The finite element method is used to investigate failure mechanisms in pin-hanger connection in aging highway bridges. Bridge pins and hangers are typically considered as critical elements whose failure may result in partial or entire collapse of the structure. The primary function of a pin-hanger connection is to allow for...
This report shows the results of acoustic emission (AE) monitoring, and provides additional information on the nature of the ultrasonic indications in the north east trunnion shaft.
A remote global monitoring system is being operated on a 65 year old lift bridge in Sturgeon Bay Wisconsin. The system uses both strain gages and clinometers to continuously monitor the "health" of the fracture critical components of the bridge. Ruggedized miniaturized data loggers are locally mounted on the structure...
Current bridge condition determination is based almost entirely on the use of visual inspection. This approach to bridge inspection provides data that is subjective and not traceable. Nondestructive evaluation (NDE) is a tool that in actuality is little used on bridges, but could eliminate much of the subjectivity of the...