Non-destructive evaluation (NDE) techniques have been used for a number of years to provide quality control of construction procedures for drilled shafts and driven concrete piles. In particular sonic echo and impulse response methods have been used extensively to check lengths and continuity of newly-installed foundations. In recent years, the...
The objective of this program is to measure the changes in the properties of the C-S-H gel phase in cement paste as a function of the Ca/Si ratio. The motivation is to better understand the hydration products that form in blended cements with lower Ca/Si ratios than portland cement. The...
The U.S. has 542,000 bridges that consume billions of dollars per year in construction, rehabilitation and maintenance funds and which are the lifelines of U.S. commerce. The 1992 ISTEA (fntermodal Surface Transportation Efficiency Act) mandates the implementation of a quantitative computerized bridge management system by I 996. A prime need...
This report describes the results of applying acoustic emission (AE) testing to the trunnion shafts of the East Span of the 1-5 Interstate Bridge. The tests were done at the request of Oregon DOT personnel to determine if active fatigue racks are present in the subject shafts.
The in-depth inspection by WIDOT detected two sites that had visible cracks in the stiffener-to-hanger diaphragm welds, the east side of Hanger 6 in the north tie girder, and the east side of Hanger 4 in the south tie girder. Additionally, many ultrasonic indications were detected by WIDOT in the...
A study is conducted to determine the effects on the early hydration kinetics and
compressive strength by seeding of Portland cement and alkali-activated blast furnace
slag with a pure form of calcium silicate hydrate (C-S-H). The effects of C-S-H seeding
during the early nucleation and growth period of each type...