The aviation industry is set to see another significant leap in new technology, namely electric aircraft. As of the time of this research, both 9-seat and 19-seat aircraft would be ready to be launched by air service providers under the Essential Air Service (EAS) program. While electric aircraft manufacturers are...
Cite this article: Shen, J., McFarland, A.G., Blaustein, R.A. et al. An improved workflow for accurate and robust healthcare environmental surveillance using metagenomics. Microbiome 10, 206 (2022). https://doi.org/10.1186/s40168-022-01412-x and Background: Effective surveillance of microbial communities in the healthcare environment is increasingly important in infection prevention. Metagenomics-based techniques are promising due to their untargeted nature but are currently challenged by several limitations: (1) they are not powerful enough to extract valid signals out of the background noise for low-biomass samples,...
Building Information Modeling (BIM) and Virtual reality (VR) have attracted growing attention within the architecture, engineering, and construction (AEC) industry in recent years. Integration of BIM and VR technology can develop workflow efficiency through enhanced common understanding and prepare students in architecture and engineering programs to become leaders of the...
Within the world of art music, composers have employed a variety of techniques to infuse popular music elements into their writing. This document is an examination of specific instances of this trend in twenty-first century wind ensemble repertoire. The study is limited to twenty-first century wind ensemble works by living...
In 1936 Modibo Keita, a twenty-year-old student at the distinguished Ecole William Ponty in Gorée, Senegal, wrote his “mémoire de fin d'étude” on Soninke childhood. The original manuscript is held in the archives of French West Africa in Dakar, part of the collection of “cahiers de William Ponty.” This paper... and En 1936 Modibo Keita, un étudiant de vingt ans à l'école distingué William Ponty à Gorée, au Sénégal, a écrit son mémoire de fin d'étude sur l’enfance sarakollé. Le manuscrit original se trouve dans les archives de l'Afrique occidentale française à Dakar, où il fait partie de la collection de...
In this paper, the correlation of reflection loss measured by an ultrasonic shear wave reflection
method and the microstructure in cement-based material is investigated. Three cement pastes
(Portland cement type I) with different water-cement ratios (0.35, 0.50 and 0.60) cured at 25
°C were examined. The ultrasonic shear wave reflection...
An empirical procedure for fitting a complementary error function (erfc) to settlement and lateral ground movement data in a direction parallel to an excavation support wall is proposed based on extensive optical survey data obtained around a 12.8 m excavation in Chicago. The maximum ground movement and the height and...
Several three-dimensional effects were observed in the performance monitoring data collected during excavation for the Ford Engineering Design Center (FEDC) in Evanston, Illinois. These responses are related to lateral deformations of the soil around the excavation walls, forces in the cross-lot and diagonal bracing that supported the temporary wall and...
This paper presents the results of 159 finite element simulations conducted to define the effects of excavation geometry, i.e., length, width and depth of excavation, wall system stiffness, and factor of safety against basal heave on the 3-dimensional ground movements caused by excavation through clays. The results of the analyses...
Successful use of monitoring data to update performance predictions of supported excavations depends equally on reasonable numerical simulations of performance, the type of monitoring data used as observations, and the inverse analysis techniques used to minimize the difference between predictions and observed performance. This paper summarizes each of these factors...